Is it possible to program the Vertex VX-2200 using the back DB 15-pin connector? - Vertex forum https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector Ham Radio Programming Discussion Board en-US Fri, 10 Apr 2026 15:54:55 +0000 wpForo 60 RE: Is it possible to program the Vertex VX-2200 using the back DB 15-pin connector? https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector#post-8 Thu, 23 Sep 2021 17:25:37 +0000 Hi Jeff, no you cannot program a vertex VX-2200 throuhg the DB15 port. You need a programming cable and programming software to do it. 

 

Take a look at this post about how to program a vertex vx-2200.

 

Hope this helps.

Nicolás 

]]> Vertex forum nsolop https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector#post-8 Is it possible to program the Vertex VX-2200 using the back DB 15-pin connector? https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector#post-7 Tue, 21 Sep 2021 14:20:27 +0000

Can those pins (or some other pins in the same connector) be used to program the radio or do I have to use the RJ45 connector in the front?

 
]]> Vertex forum Jeff https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector#post-7