Vertex forum - Ham Radio Programming Forum https://hamradioprogramming.net/community/vertex-forum Ham Radio Programming Discussion Board en-US Fri, 10 Apr 2026 16:45:48 +0000 wpForo 60 Vertex standard programming issue https://hamradioprogramming.net/community/vertex-forum/vertex-standard-programming-issue Sun, 22 Dec 2024 20:33:00 +0000

I have a vertex standard VX6000 that I want to program to new frequencies. I have the proper cabling and software from the manufacture, CT70 and CE49. When I try to upload from the radio the software states “turn radio off and back on to start upload”. I do this and it always comes back with “turn radio on” after I already have. I also did this holing the power and function button under the power button to go to the “pc clone” condition with same results.

Thanks for any help.

Phil

]]> Vertex forum NavyPhil https://hamradioprogramming.net/community/vertex-forum/vertex-standard-programming-issue Is vertex VX-2100 roger beep capable? https://hamradioprogramming.net/community/vertex-forum/is-vertex-vx-2100-roger-beep-capable Sat, 15 Oct 2022 14:39:30 +0000 I know the roger beep thing is related to CB but I would like to have my VX-2100 to transmit a tone after the PTT is released.

 

Any ideas on how to do this?

]]> Vertex forum Peter https://hamradioprogramming.net/community/vertex-forum/is-vertex-vx-2100-roger-beep-capable Vertex VX-2200 receive only channels https://hamradioprogramming.net/community/vertex-forum/vertex-vx-2200-receive-only-channels Thu, 11 Aug 2022 11:21:22 +0000 I recently purchased a Vertex VX-2200 and I am using CE softwareto program it. I am wanting to put in my local NOAA freq but I want to prohibit TX for obvious reasons. Is there an option to do this? I tried leaving the TX freq. blank and that didn't work, I tried entering 000.000 etc but get the out of freq. range.

]]> Vertex forum Richard https://hamradioprogramming.net/community/vertex-forum/vertex-vx-2200-receive-only-channels Can a vx-2200 be set back to factory https://hamradioprogramming.net/community/vertex-forum/can-a-vx-2200-be-set-back-to-factory Tue, 21 Dec 2021 11:04:20 +0000 Hi! wanting to know if a vx-2200 can be reset back to factory setting?

]]> Vertex forum aussigaz https://hamradioprogramming.net/community/vertex-forum/can-a-vx-2200-be-set-back-to-factory Is it possible to program the Vertex VX-2200 using the back DB 15-pin connector? https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector Tue, 21 Sep 2021 14:20:27 +0000

Can those pins (or some other pins in the same connector) be used to program the radio or do I have to use the RJ45 connector in the front?

 
]]> Vertex forum Jeff https://hamradioprogramming.net/community/vertex-forum/is-it-possible-to-program-the-vertex-vx-2200-using-the-back-db-15-pin-connector Vertex ftl-2011 out of band programming https://hamradioprogramming.net/community/vertex-forum/vertex-ftl-2011-out-of-band-programming Mon, 20 Sep 2021 23:30:53 +0000 hi i would like to know if i can program a vertex ftl-2011 radio.
I need to use a model C in the ham radio range, in my case from 144 to 148 Mhz.

The C model starts from 148 MHz so it does not work for me.

Any ideas or experiences?

]]> Vertex forum Richard https://hamradioprogramming.net/community/vertex-forum/vertex-ftl-2011-out-of-band-programming