Ham Radio Programming Forum - Recent Posts

RE: MDT400 programing software

Victor LU1DVH — Tue, 19 Aug 2025 22:26:26 +0000

Hola, tambien lo estoy buscando, el sofware se llama "PROPC" tengo tambien una radio MDT-400 de Teltronic.

Gracias!!

Saludos LU1DVH

RE: MDT400 programing software

nsolop — Fri, 11 Jul 2025 01:25:42 +0000

Do you know the name of the software? have you foud it?

MDT400 programing software

jnav — Fri, 21 Mar 2025 05:46:49 +0000

Hi, I am looking for MDT400 programing software.

Thanks in advance, 73. EA3DRW

IMG20250321064027.jpg

Vertex standard programming issue

NavyPhil — Sun, 22 Dec 2024 20:33:00 +0000

I have a vertex standard VX6000 that I want to program to new frequencies. I have the proper cabling and software from the manufacture, CT70 and CE49. When I try to upload from the radio the software states “turn radio off and back on to start upload”. I do this and it always comes back with “turn radio on” after I already have. I also did this holing the power and function button under the power button to go to the “pc clone” condition with same results.

Thanks for any help.

Phil

RE: adjust squelch level on Kenwood TK-762GH (howto?)

nsolop — Tue, 07 Nov 2023 00:14:41 +0000

Hi! I don't own one of those Kenwood radios. Will try to get my hands on the programming software and check in there if there is any way to adjust it.

Generally, on commercial radios, squelch levels can be adjusted on the programming software on o a programmable key on the front of the radio.

adjust squelch level on Kenwood TK-762GH (howto?)

dwarnok — Tue, 29 Aug 2023 00:00:23 +0000

Greetings,

I have a Kenwood TK-762GH as a component of an APRS iGate, as well as the operating and service manuals for the radio.

Is there some way to adjust the Rx squelch level, please? The green led is constantly on, and audio is a constant noise. I would like to be able to adjust the Rx squelch level, but don't yet know my way through the buttons-menu to adjust it. The operator's manual doesn't seem to address the matter, so your help is much appreciated.

RE: Is vertex VX-2100 roger beep capable?

nsolop — Sat, 15 Oct 2022 15:51:52 +0000

You have to program the radio to do this. I asume that someone programmed the radio for you.

Here you have a link withinformation on how to program a vertex VX-2100. It does not include any information about the beep tone you are trying to do. It just help you understand the programming process.

But, again, who is on 2M using a roger beep?.

Hope this helps.

RE: Is vertex VX-2100 roger beep capable?

Justin — Sat, 15 Oct 2022 14:59:46 +0000

@peter you need a programming cable and a programming software to do what you want to do. How are you programming the radio?

RE: Is vertex VX-2100 roger beep capable?

Peter — Sat, 15 Oct 2022 14:50:20 +0000

Can't it be enabled by a front panel key?

RE: Is vertex VX-2100 roger beep capable?

nsolop — Sat, 15 Oct 2022 14:46:52 +0000

I don't believe that you actually need a roger beep on VHF but if you still want to move forward take a look at the DTMF ANI options on the programming software.