Featured
Vertex VX-2200 and VX-2100 accessory connector explained
As I mentioned in previous posts, I consider the Vertex VX-2200 and the Vertex VX-2100 as great radios for doing APRS and packet radio. But why I like this radios for this kind of amateur radio activities? It’s because the radio includes an accessory connector in the back from which you can actually manage the…
Continue Reading Vertex VX-2200 and VX-2100 accessory connector explained
Spotlight
Build your own Teltronic M4000 programming cable
As I mentioned on a previous post, it was quite of a challenge working with the Teltronic M4000 because there is no information available anywhere. A friend of mine lend me one to see if I can program the Teltronic M4000 on the amateur radio bands but I got…
Continue Reading Build your own Teltronic M4000 programming cable
My adventures with Teltronic M-4000 radios
A few weeks back I got a few Teltronic M-4000 radios to see if I can put those to work on the UHF amateur radio range. To my surprise, there were not a lot of information about this radio online. I have decided to share what I found during…
Yaesu FTH-2009 programming using DOSBOX and USB cable
It’s been a long time since I posted here on the blog. After hammering my head with a Yaesu FTH-2009 for weeks I was able to get it programmed. In this post I will tell you how to program a Yaesu FTH-2009 using DosBox and a USB cable. After…
Continue Reading Yaesu FTH-2009 programming using DOSBOX and USB cable
How to make your own Icom OPC-1122U – DIY
A few weeks back I needed an Icom OPC-1122 programming cable to program an ICOM IC-F211. I decided to make one myself and and here you can read my how to make your own Icom OPC-1122U instructions. Before moving on I would like to be clear on this, I only…
How to program ICOM IC-F211
Hi there, it´s been a long time since last post. On this one, my first about ICOM radios, I will be covering how to program ICOM IC-F211 including what is needed and how to do the programming of a IC-F211 radio. The Icom IC-F211 is a 128 channels UHF rugged…
Motorola PRO3100 specifications
After a long time trying to get my hands on a Motorola PRO 3100, a good friend of mine lended me one a few weeks back. On this post I will share the Motorola PRO3100 specifications alongside some other information like model identification and programming information. This affordable model…
Explore
How to make your own Icom OPC-1122U – DIY
A few weeks back I needed an Icom OPC-1122 programming cable to program an ICOM IC-F211. I decided to make one myself…
How to program ICOM IC-F211
Hi there, it´s been a long time since last post. On this one, my first about ICOM radios, I will be covering how…
Motorola PRO3100 specifications
After a long time trying to get my hands on a Motorola PRO 3100, a good friend of mine lended me one…
How to program Tait TM8110
After strugling to program this radio for a few weeks (programming cable problem) I will share with you on this post the…
Tait TM8110 specifications
I will be sharing on this post the Tait TM8110 specifications including, pinouts, programming cable, model identification and much more. This is…
Vertex vx-2200 specifications
In this post I’m going to discuss Vertex VX-2200 specifications, and other important stuff about this commercial radio like pinout of the…
How to program Vertex VX-414
On this post I will be covering how to program vertex VX-414 including what is needed and how to do the programming…
How to program vertex FTL-2011
On this post I will be covering how to program vertex FTL-2011 including what is needed and how to do the programming…
